Controling multiple projectors with id numbers, Setting the id no – Sharp XG-P25X User Manual

Page 57

Text mode
Original mode

E-54

Basic Operation

Controling Multiple Projectors with ID Numbers

This projector can form a network of up to 250 projectors. To identify separately and control specified
projector, you need to set ID No.. The ID No. is factory preset to “001”. See page

for the procedure

details.

Setting the ID No.

Press © to select the first digit and ∂/ƒ to select the desired number. Continue this procedure for the remaining
two digits.

• Be sure to set the ID No. in the Option menu and attach a corresponding number seal to the projector.
• The ID No. can be set from 001 to 250.
• For details on intended purpose, see pages

XG-P25X/CD (E)-e

02.3.19, 7:11 PM