Setting the stacking mode, Locking the operation buttons on the projector – Sharp XG-P25X User Manual

Page 55

E-52

Basic Operation

Setting the Stacking Mode

You can double the brightness of an image by stacking two projectors and projecting same picture
simultaneously. To control two projectors, assign one as the master and one as the slave. The slave
projector will duplicate any operational settings made to the master projector. See page

for the

procedure details.

• When the projector is set to “Master”, button operation signals will be transmitted through RS-232C.
• When the projector is set to “Slave”, operations follow the button operations sent from the “Master”.
• When set to slave, all buttons on the projector along with ∂/ƒ/ß/©, ENTER, UNDO, POWER ON, POWER OFF, LENS and

MENU on the remote control can be used. The slave cannot operate the other buttons on remote control.

• For details on intended purpose, see pages

and

Locking the Operation Buttons on the Projector

This function can be used to lock the use of certain operation buttons on the projector. The user can still
operate the projector fully with the remote control. See page

for the procedure details.

Description

All operation buttons are functional.

Only Input/Volume/Mute functions on the

projector are available.

All operation buttons on the projector are
unavailable.

Selected item

Normal

Level A

Level B

• To cancel the Keylock Level, perform the above procedure using the remote control.
• See page

for details using the password function.

XG-P25X/CD (E)-e

02.3.19, 7:10 PM