SMC Networks SMC2804WBR V.2 - Manual (Page 43)

Advanced Setup
41
• Set date and time using PC's date and time
Click on the radio button for synchronizing the Wireless
Barricade™’s internal clock with the host PC.
• Set date and time manually
For manually setting the date and time, configure the date by
selecting the options from the drop-down list, and enter the
digits for the time.
Password Settings
Use this menu to restrict access based on a password. For
security you should assign your own password before exposing
the Wireless Barricade™ to the Internet. (Default: smcadmin.)
Passwords can contain from 3 –12 alphanumeric characters
and are case sensitive.
Note: If your password is lost, or you cannot gain access
to the user interface, press the Reset button on the
rear panel (holding it down for at least five seconds)
to restore the factory defaults.