Samsung R70 - Manual (Page 177)

176
Q
I cannot connect to a computer connected to the
Ad-Hoc network.
A1 Check the security settings and network name of the
wireless Ad-Hoc network.
A2 Check the TCP/IP settings of the computers
connected to the wireless Ad-Hoc network. The IP
addresses of the computers to be connected to a
wireless Ad-Hoc network must be set to the same
sub-network address.
● For example, if the TCP/IP setting is configured
to a fixed IP address, select Use the following IP
address in the TCP/IP Properties of the wireless
adapter, configure the items as follows and try
again.
IP: 10.0.0.1~10.0.0.254, Subnet Mask:
255.255.255.0.
It is recommended using a fixed IP address for
wireless Ad-Hoc network connections.
A3 I have to register the IP addresses allocated by
McAfee SecurityCenter as a 'Trusted IP'.
● Select Advanced menu > Settings > Internet
and Network > Advanced, and register an IP
address or IP address range as a Trusted or
Prohibited IP.
Q
During the wireless Ad-Hoc network operation,
the AP (Access Point) is intermittently not found.
A This problem occurs intermittently during the
wireless Ad-Hoc network operation. Even if this
problem occurs, the wireless Ad-Hoc network
operation is working properly and is not affected.
Click Refresh to update the AP list.
Q
I have set the same IP address for both the
wireless and wired connections, but they do not
work properly.
A You cannot use wireless and wired connections
using the same IP address. To sequentially use
both the wired and wireless connections with the
same IP address, you need to set the currently not
needed connection to Do Not Use in the Network
Connections of the Control Panel.