beautypg.com

Operating your camera – Samsung SOC-4160 User Manual

Page 12

background image

COLOR CCD CAMERA

User Guide

22

COLOR CCD CAMERA

User Guide

23

LOW

HLC (High Light Compensation) :

If the scene contains extremely bright light areas such as; from car headlights, the

light can mask out much of the on-screen detail.

- LEVEL : Adjust level of the HLC function.
- LIMIT : Enable to change the operating condition.
- MASK COLOR/TONE : Change the color / transparency of the masking area.

(Black, Red, Blue, Cyan, Magenta)

- TOP/BOTTOM/LEFT/RIGHT : Adjust the area to be enhanced

OFF : Not being used

3. Select a desired mode using the Function Setup switch and press the Function Setup switch.

Select ‘BLC’ to adjust the area to be

enhanced then adjust the level.

HLC : Enable the user to change the level,

limit, mask color/tone and area.

• Because there can be a difference in the effectiveness of HLC according to the amount of

light area in the screen, optimize the installation angle for the best HLC performance.

• When dark, the HLC is only activated when a bright light exceeding a specific size in

NIGHT ONLY mode.

• The HLC is not activated in day light or when bright light is not present at night in NIGHT

ONLY mode.

Notes

This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ‘SSNR3’ by using the Function

Setup switch so that the arrow indicates ‘SSNR3’.

SSNR3

MAIN SETUP

1.LENS

DC

2.EXPOSURE

3.WHITE BAL

ATW

4.SSDR

OFF

5.BACKLIGHT

OFF

6.SSNR3

ON

7.DAY/NIGHT

AUTO

2. Select a desired mode using the Function Setup switch.

OFF : Deactivates SSNR3. Noise is not reduced.

ON : Activates SSNR3 so that noise is reduced.

3. Set the SSNR3 mode to ‘ON’ and press the Function Setup switch. Then you can

adjust the noise reduction level.

Operating Your Camera

• You cannot set the SSNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the

EXPOSURE menu is ‘OFF’.

• When adjusting the noise reduction level in the SSNR3 mode, remember that

the higher the level set, the more the noise level will be reduced, as will the
brightness of the image.

Notes