Sharp AR-M205 - Manual (Page 81)

79
APPENDIX
9
Scanner Function
* The resolution may be enhanced by the scanner driver depending on the scanned area and amount of memory installed in the
machine.
Type Flatbed scanner
Scanning method Document glass / SPF/RSPF
Light source Cold cathode fluorescent lamp
Resolution*
Basic: 600 dpi x 600 dpi
Setting range: 50dpi - 9600dpi
Original types Sheet media, books
Effective scanning area 11-45/64" (297 mm) (Lengthwise) x 16-63/64" (431 mm) (Width)
Scanning speed 2.88 msec/line
Input Data 1 bit or 12 bit
Output Data 1 bit or 8 bit
Scanning colors Black and white 2 value, Grayscale, Full color
Protocol TWAIN / WIA (Windows XP only) / STI
Interface port
USB port (USB 1.1)
USB port (USB 2.0, dual function board must be installed)
Drop out color Yes
Supported operating
systems
Windows98/Me
Windows 2000 Professional/Windows XP Home Edition/Professional
(Detailed information can be found in the Software Setup Guide)
Void area
Top and bottom edges 7/64" (2.5 mm) due to scanner driver
Right and left edges 1/8" (3.0 mm)
Interface cables
[USB cable (only for connection to USB 1.1 port)]
Shielded twisted pair cable (max. length 10 feet (3 m))
[USB cable (only for connection to USB 2.0 port)]
Shielded twisted pair cable (max. length 10 feet (3 m), must support USB 2.0)
Please purchase a commercially available USB cable.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units. There may be some deviations from these values in individual units.
Note