Sharp AR-M205 - Manual (Page 51)

49
USER SETTINGS
5
SELECTING AUDITING MODE SETTINGS
1 Hold down the [Light] key ( ) until
the alarm indicators ( , , , ,
) blink.
The display shows "- -"
with the left hyphen
blinking.
2 Enter the program number with the
numeric keys.
• See "AUDITING MODE
SETTINGS" (p.48 to
p.49) for the program
numbers.
• The selected program
number blinks.
• To select "Auditing
mode", enter "10".
3 Press the [START] key ( ).
• The selected program
number stops blinking
and lights steadily.
• The currently selected
setting code blinks in
the 1st digit of the
display.
4
Enter the desired setting code for the
program as explained in the detailed
procedures on the following pages.
For the setting codes,
see "AUDITING MODE
SETTINGS". (p.48 to
p.49)
5 Press the [Light] key ( ) to complete
the settings.
The alarm indicators ( , , , , ) go
off and the display returns to the number of
copies display.
If you enter the wrong number, press the
[CLEAR] key (
) and then enter the correct
number.
• If you enter the wrong number, press the
[CLEAR] key ( ) and return to step 2.
• If "E" (error code) blinks in the first digit of
the display, press the [CLEAR] key ( )
and return to step 2.
1 3 5
READ END
Note
START
READ-END
Note