Replacing the battery, Quick startup instructions, Quick reference guide 7 replacing the battery – Symbol Technologies P370 User Manual
Page 7
Quick Reference Guide
7
Replacing the Battery
1.
Place the top portion of the battery (curved side up, contacts toward top) into
the scanner and then slide it up the handle.
2.
Replace the battery compartment cover.
3.
Slide the release latch up to secure the cover in place.
Quick Startup Instructions
The table that follows includes an index of startup instructions to help get you
started quickly. The index is listed in a step-by-step order beginning with step 1,
Setting up the System. This index references pages in the P370/P470 Keyless RF
Scanners Product Reference Guide. The Product Reference Guide is included on
the CD shipped with the scanner. It is also available on the Symbol Web site at:
.
Mandatory steps are designated by an asterisk (*). If an item has multiple pages
referenced, the most important reference is in bold.
Topic
PRG Page
1. Setting Up the System
• Connecting the cradle to a host *
2-1
-
RS-232 connection
2-2
-
Synapse connection (keyboard wedge, USB, etc.)
2-3
• Charging the battery *
1-3, 2-8
• Pairing the scanner with the cradle *
2-6
-
RF channel
2-4, 4-13, C-1
-
Coexisting in Spectrum24 environments
2-7
Battery
Compartment
Cover
Battery
Release
Latch
Pull Tab
Battery