Tuning into a station automatically (auto tuning), Tuning into a station directly (direct tuning) – Sony STR-DN2010 User Manual
Page 62
![background image](/manuals/135248/62/background.png)
62
GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm
masterpage: Left
STR-DN2010
4-182-049-11(1)
1
Press GUI MODE.
After “GUI ON” appears on the display
for a while, the GUI menu appears on the
TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press
V/v repeatedly to select
“
FM” or “
AM”, then press
or
b.
The FM or AM menu list appears on the
TV screen.
3
Press
V/v repeatedly to select
“Auto Tuning”, then press
.
4
Press
V/v.
Press
V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1
Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 62), or select the preset station you
want (page 63).
2
Press TOOLS/OPTIONS.
3
Press
V/v repeatedly to select “FM Mode”,
then press
or
b.
4
Press
V/v repeatedly to select “Mono”, then
press .
You can enter the frequency of a station
directly by using the numeric buttons.
1
Press GUI MODE.
After “GUI ON” appears on the display
for a while, the GUI menu appears on the
TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press
V/v repeatedly to select
“
FM” or “
AM”, then press
or
b.
The FM or AM menu list appears on the
TV screen.
3
Press
V/v repeatedly to select
“Direct Tuning”, then press
.
4
Press SHIFT, then press
numeric buttons to enter the
frequency.
Example 1: FM 102.50 MHz
Select 1
b 0 b 2 b 5 (b 0*)
Example 2: AM 1,350 kHz
Select 1
b 3 b 5 b 0
* Press 0 for European model only.
Tip
If you have tuned in an AM station, adjust
the direction of the AM loop antenna
(aerial) for optimum reception.
5
Press .
If you cannot tune in a station
“– – – .– – MHz” appears and then the screen
returns to the current frequency.
Make sure you have entered the right
frequency. If not, repeat step 4. If you still
cannot tune in a station, the frequency is not
used in your area.
Tuning into a station
automatically (Auto Tuning)
FM
AM
Tuning into a station directly
(Direct Tuning)
FM
AM