Advanced features – Sharp CD SW340 User Manual
Page 33
03/12/17
CD-SW340 02-43.fm
33
CD-SW340
Advanced Features
Note:
When performing timer playback or recording using another unit
connected to the AUDIO IN jack, select “AUDIO IN” in step 9.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit will not turn on or off.
Checking the timer setting in the timer stand-by mode:
Canceling the timer setting in the timer stand-by mode:
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power stand-
by mode.
The “TIMER” indicator lights up and the unit is ready for timer
playback or timer recording.
12
When the preset time is reached, playback or recording
will start.
The volume will increase gradually until it reaches the preset
volume.
13
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be canceled.
The “r” indicator will blinking during timer playback.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is canceled. Cancel the
daily timer when it is not used.
The “DAILY r” indicator will blinking during timer playback.
TIMER
CD
4
5
3
2
1
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select
“ONCE CALL” or “DAILY CALL”, and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select
“ONCE OFF” or “DAILY OFF”, and press the MEMORY button.
Timer will be canceled (the setting will not be canceled).
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select
“ONCE ON” or “DAILY ON”, and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.