Connecting a lan cable, Preparations (step 1 connection and installation) – JVC VN-C10 User Manual

Page 14

Text mode
Original mode

Connecting a LAN Cable

Connect the camera to a hub or a PC by using a LAN cable.

Note

For 100 BASE-TX, use a CAT-5 cable.

POWER

OUT COM

ALARM

DC12V

C24V

OUTPUT

INPUT

PUSH

CLASS 2 ONL

Y F

or USA

ISOLA

TED PO

WER ONL

r EUR

OPE

10BASE-T/100BASE-TX

For USA

DO NOT CONNECT TO THE
TELEPHONE NETWORK

• For hub connection

Use a straight cable.

• For PC connection

Use a cross-over cable.

Caution

There are a few types of LAN board for
which a cross-over cable cannot be used.
Check the specifications of the LAN board
to be used before performing connection.

Preparations (Step 1 Connection and Installation)

VN-C10_E_01-24.pm65e

14/04/03, 9:31 AM