JVC KD-LH2000R - Manual (Page 20)

20
ENGLISH
CD OPERATIONS
2000 D
Notes:
• When a disc is already in the loading slot, selecting
“CD” as the source starts CD play.
• When a disc is inserted upside down, the disc
automatically ejects (if the control panel is open). If
the control panel is closed, “Please Eject” appears.
• If you change the source, CD play also stops
(without ejecting the disc).
Next time you select “CD” as the source, CD play
starts from where playback has been stopped
previously.
To stop play and eject the disc
Press 0.
CD play stops, the control panel opens, then the
disc automatically ejects from the loading slot.
If you change the source, the CD play also stops
(without ejecting the disc this time).
Notes:
• If the ejected disc is not removed for about 15
seconds, the disc is automatically inserted again
into the loading slot to protect it from dust.
(CD play will not start this time.)
• You can eject the disc even when the unit is turned
off.
Playing a CD
1
Open the control panel.
2
Insert a disc into the loading slot.
The unit turns on,
draws a disc and starts
playback automatically.
3
Close the control panel by hand.
The opening display
then source name
display appears first....
All tracks will be played repeatedly until you stop
playback.
Current track
Elapsed playing time
Total track number/Total playing time
EN20-23LH2000R[E]f.pm5 02.3.29, 4:23 PM 20