JVC CA-MD70 - Manual (Page 46)

– 40 –
English
Using Daily Timer
With Daily Timer, you can wake up to your favorite music
or radio program.
• You can set Daily Timer whether the unit is turned on or
off.
How Daily Timer actually works
The unit automatically turns on, and starts playing the
specified source when the timer-on time comes. Then,
when the timer-off time comes, the unit automatically turns
off (stands by).
The timer settings remain stored in memory until you reset
them or disconnect the AC power cord.
1
Press CLOCK/TIMER repeatedly until “DAILY
SET” appears in the main display.
• Each time you press the button, the timer mode
changes as follows:
2
Rotate MULTI JOG to set the hour of the timer-on
time, then press SET.
3
Rotate MULTI JOG to set the minute of the timer-
on time, then press SET.
4
Rotate MULTI JOG to set the hour of the timer-off
time, then press SET.
5
Rotate MULTI JOG to set the minute of the timer-
off time, then press SET.
Continued
7
Rotate MULTI JOG to select a preset channel, then
press SET.
After completing the settings...
The REC indicator lights on the display window, and Recording
Timer is ready for unattended recording.
After a timer recording is complete...
Set the volume to an appropriate listening level.
If you press a certain button while Recording Timer
is operating
Recording will stop.
To use the same Recording timer settings repeatedly
Once you have set Recording Timer, it remains stored in
memory until you change it.
To activate Recording Timer with the previous settings
recalled, follow the procedure below:
1 Press CLOCK/TIMER repeatedly until “REC ON/
OFF?” appears in the main display.
2 Press SET to use the previous settings for next timer
recording.
The REC indicator lights on the display window.
• To deactivate Recording Timer, press CANCEL in
this step.
DAILY ON/OFF? REC ON/OFF?
REC SET
DAILY SET
Previous indication Clock
Continued
EN28-48.CA-MD70[U] 98.11.18, 3:22 PM 40