JVC LPT1056-001A - Manual (Page 14)

14
Before Operation-VCR part
How to use the main menu
This DVD+VCR can easily be programmed by
using the menus displayed on screen.
The menus are controlled by the Remote Control
Handset.
1. Switch on your TV set and DVD+VCR by pressing
the Í/I button.
2. Press i button.
The main menu will appear on the TV screen.
• REC - Timer recording setting (see p. 23).
• PR SET - Manual tuning setting (see p. 15).
• ACMS - ACMS (Automatic Channel Memory
System) (see p. 14).
• SET - Date & clock setting (see p. 13).
• SYS - To set the Colour TV System (see p. 13).
•
(Dr.) - To check a problem with your VCR (see
p. 26).
• F.OSD ON/OFF - To display the operational mode
of your VCR (see p. 25).
• (16:9/4:3) - To select the aspect ratio of your
TV (see p. 26).
• DECODER - To use a pay-TV decoder (or
Satellite) with your VCR (see p. 26).
• (OPR) - To improve the playback picture (see p.
20).
Appear when playback only.
• NIC - To activate or deactivate the NICAM digital
sound (see p. 25).
Tip:
You can change the menu language on the DVD setup
menu. (See the Menu Language on page 17.)
3. Press 2 and 1 to select the desired menu.
Press ENTER/OK and use 3 or 4 to select.
4. Press i to return to a TV picture.
Tuning in TV Stations
Automatically
If the TV broadcast signal is weak your DVD+VCR
may not detect the necessary information and will
not be able to store them correctly. To overcome
this problem please turn to the MANUAL TUNING
section on page 15.
1. Press Í/I to turn on your DVD+VCR.
2. Press i button.
The main menu will appear on the TV screen.
Press
2 or 1 to select the ACMS.
Press ENTER/OK.
3. Select the country according to your area with 2 or
1.
A:Austria, B:Belgium, CH:Switzerland, D:Germany,
DK:Denmark, E:Spain, F:France, I:Italy, N:Norway,
NL:Netherlands, P:Portugal, S:Sweden,
SF:Finland, “OTHERS”
4. Press ENTER/OK to start the automatic storing of
the channels of the TV stations in your area.
5. The TV STATION TABLE will appear when tuning is
completed.
Press i to save your settings.
Notes:
The DVD+VCR’s clock will be set automatically when
automatic tuning has finished. If the clock is wrong
please see “Setting the clock Manually” on page 13.
SYS
1 2
SET
OSD
ON
OFF
OSD f
SYS
1 2
SET
OSD
ON
OFF
OSD f
ACMS
Pr-12
ACMS
Pr-12
OK i
A
N
NL P S SF OTHERS
B D DK E F I
OK i Pr-12
ACMS
CH
02 C02 00 - - - - -
03 C03 00 - - - - -
04 - - - - - - - - -
05 - - - - - - - - -
06 - - - - - - - - -
07 - - - - - - - - -
08 - - - - - - - - -
01 C01 00 - - - - -
OK i , DELETE :
MOVE :
PSET
R
VJ9033CP1Z_E-EZ.book Page 14 Friday, March 11, 2005 10:12 AM