Variable shuttle search, 17 blank search, Blank search – JVC GR-D850AA User Manual
Page 17
EN
17
MasterPage: Start_Right
Recording & Playback
EN
G
L
ISH
Allows variable-speed search in either direction
during video playback.
During playback, press 5 once or twice for
forward search, or 3 once or twice for
reverse search.
● To resume normal playback, press 4/9.
● During playback, press and hold 5 or 3.
The search continues as long as you hold the
button. Once you release the button, normal
playback resumes.
Helps you find where you should start
recording in the middle of a tape to avoid time
code interruption (
Perform steps
–
in “Normal
Press BLANK
.
● The “BLANK SEARCH” indication appears
and the camcorder automatically starts
reverse or forward search, then stops at the
spot which is about 3 seconds of tape
before the beginning of the detected blank
portion.
● To cancel Blank Search, press
8 or
BLANK
.
Notes:
● Before starting Blank Search, if the current
position is at a blank portion, the camcorder
searches in the reverse direction. If the current
position is at a recorded portion, the camcorder
searches in the forward direction.
● If the beginning or end of the tape is reached
during Blank Search, the camcorder stops
automatically.
● A blank portion which is shorter than 5 seconds
of tape may not be detected.
● The detected blank portion may be located
between recorded scenes. Before you start
recording, make sure there is no recorded
scene after the blank portion.
HDV
Appears when pictures recorded in the HDV
format are detected. The pictures in the HDV
format cannot be played back with this
camcorder.
Variable Shuttle Search
3
5
x-10
x-3
x3
x10
During Shuttle Search,
parts of the picture may
not be clearly visible,
particularly on the left side
of the screen.
During Shuttle Search,
parts of the picture may
not be clearly visible
across the screen.
Attention:
Blank Search
1
1
1
1
1
2
2
2
2
2
GR-D850AA_EN.book Page 17 Thursday, October 18, 2007 5:26 PM