JVC SR-V10U - Manual (Page 50)

50
EN MULTI-BRAND REMOTE CONTROL
This Remote can control some functions of remote
controllable TVs of the brands listed below. Without
setting, you can control a JVC TV.
1 Turn on the TV
Turn on the TV using the Power button on the TV
or its Remote.
2 Set TV brand code
Follow the example shown below.
1 Press and hold TV.
2 Press MBR SET.
3 Press the Number keys to enter your TV’s
brand code by referring to the table below.
4 Press OK, and release TV.
The TV should turn off. If it does, try other
operations below. (
੬ step 3).
● Once you have set the Remote to operate the
TV, you do not have to set it until you replace
the batteries from the Remote.
● PANASONIC has two codes. If the TV does not
function with one code, try entering the other.
3
Operate TV
While holding down TV, press one of the
following buttons: POWER, TV/VCR, TV CH +/–,
(TV Muting), TV VOL +/–, and Number
keys.
● For some brands, you must press ENTER after
having pressed the Number keys to enter a
channel number.
NOTES:
● Depending on the type of TV, some or all functions cannot be
operated using this Remote.
● It’s not possible to operate a TV not equipped with a remote
sensor.
TV BRAND NAME BRAND CODE
JVC 01, 03
HITACHI 10
MAGNAVOX 02
MITSUBISHI 03
PANASONIC 04, 11
RCA 05
SHARP 06
SONY 07
SAMSUNG 12
SANYO 13
SEARS 13
TOSHIBA 08
ZENITH 09
TV Brand
Setting
(Ex.) To set Remote to RCA 05:
Press in succession
Hold
down
Release
1 2 3
4 5 6
7 8 9
0
2
4
1
3
2
–3
2
–1 4
2
–4
Number
TV CH +/–
POWER
TV VOL +/–
ENTER
TV/VCR
TV
2
–2
TV
MBR SET
A/B
5 0
OK 3
ENTER/O
SD