JVC SR-V10U - Manual (Page 40)

40
EN OTHER USEFUL FUNCTIONS (cont.)
You have to select which terminal — either VIDEO (composite) or S
VIDEO (Y/C separate signals) — to use as the video input terminal on the
front panel.
Make sure to select the correct terminal; otherwise, you may fail in
recording (editing) on this VCR.
You have to select which terminal — either VIDEO (composite) or S
VIDEO (Y/C separate signals) — to use as the video input terminal on the
rear panel.
Make sure to select the correct terminal; otherwise, you may fail in
recording (editing) on this VCR.
Ⅵ REAR AUX INPUT
VIDEO
S-VIDEO
Ⅵ FRONT AUX INPUT
VIDEO
S-VIDEO
* The default setting is bold in the table below.
When this function is set to “ON”;
● If a SAP program is received, the SAP audio is recorded on both the
normal and Hi-Fi tracks. The main audio is not recorded.
● If a non-SAP program is received, the main audio is recorded on both
the Hi-Fi and normal tracks.
When this function is set to “OFF”, the SAP audio cannot be recorded.
This VCR can record two sound tracks simultaneously (normal and Hi-
Fi) on a tape.
You can select the sound track(s) to listen to while playing back a Hi-Fi
stereo tape.
In addition, when playing back a prerecorded tape containing two
separate audio programs on the Hi-Fi tracks, you can choose either one
by selecting either “HI-FI L” or “HI-FI R”.
NOTES:
● While playing back a monaural tape, sounds on the normal track will be heard
regardless of this setting.
● If RF connection ( ੬ pg. 7) is used for viewing pictures on the TV, sound will be
monaural even though you select “HI-FI”.
● You can also use the A. MONITOR button on the Remote to select the desired
monitor sound. ( ੬ pg. 17)
You can determine which recording mode — either S-VHS mode or VHS
mode — is used for recording on S-VHS tapes.
When this function is set to “ON”, you can record on S-VHS tapes with
S-VHS picture quality.
When this function is set to “OFF”, you can record on S-VHS tapes with
VHS picture quality.
NOTES:
• S-VHS mode allows you to make high quality video recordings with horizontal
resolution of 400 lines, comparing with the 230 lines of resolution of
conventional VHS recordings. To achieve the highest quality picture we
recommended to record in S-VHS mode. (But remember that a conventional
VHS VCR without SQPB cannot play back S-VHS tapes recorded in S-VHS
mode.)
• S-VHS MODE setting does not affect recording on VHS tapes. Recording on
VHS tapes is always performed in VHS mode except when using S-VHS ET
mode (
੬ pg. 41).
Ⅵ AUDIO MONITOR
HI-FI: Normally select this.
Hi-Fi sound is played
back.
HI-FI L: Sound on the left Hi-Fi
channel is played back.
HI-FI R: Sound on the right Hi-Fi
channel is played back.
NORM: Sound on the normal track
is played back.
MIX: Both sounds on the Hi-Fi
track and normal track are
mixed and played back.
Ⅵ S-VHS MODE
ON
OFF
Refer to page 37 for setting procedures.
Ⅵ 2ND AUDIO RECORD
ON
OFF