JVC SR-V10U - Manual (Page 29)

EN
29
PROGRAM 1
(PLUSCODE NO. 12345678)
START STOP
8:00PM = 10:00PM
DATE CH
12/24/00 12 SP
SUN
PRESS (8=DAILY, 9=WEEKLY
STOP+/– = STOP TIME, SP/EP)
PRESS (PROG.) TO END
4
Input receiving channel number
The guide channel
number, which is
assigned to the TV or
cable station for the
PlusCode number that
you entered in step 3,
will appear
automatically on the
Guide Channel Set screen.
Press the Number keys (or CH +/– or SHUTTLE
PLUS
%fi) to input the number of the channel on
which the broadcast for the PlusCode number is
received on the VCR, then press OK.
● The Guide Channel Set screen appears only
when you input the PlusCode number of a
station for which the guide channel number has
not been set previously.
● If you receive your channels through a cable
box, select the cable box output channel — the
channel on which you view the cable box
programs on the TV.
5
Check program date
The PlusCode number you entered and the
corresponding timer
recording program is
displayed on the
Program screen. Check
to make sure it is
accurate.
● To change the stop
time, press STOP +/–.
● To timer-record daily (Sunday–Saturday) or
weekly serials, press DAILY (number “8”) or
WEEKLY (number “9”). “DAILY” or “WEEKLY”
appears on the Program screen.
Pressing the button again makes each
corresponding display disappear.
● If you made a mistake, press CANCEL to access
the PlusCode No. screen again and input the
correct PlusCode number.
● If an incorrect PlusCode number or the one for
a broadcast already finished has been inputted,
“ERROR” is displayed for about 5 seconds, then
the PlusCode No. screen reappears.
6 Set tape speed
Press SP/EP.
IMPORTANT
If you have moved to a different area or if a broadcasting
station’s channel number has been changed, the wrong
VCR CH number will be displayed on the Program screen
in step 5. When this happens, set the correct guide
channel number for that station. (
੬ pg. 30, “Changing
VCR Plus+ Setting”)
NOTES:
● In case of a power failure after programming, the recorder's
memory backup keeps your selections (if the lithium battery is
not exhausted).
● To timer-record cable channels received through a cable box,
be sure to keep the cable box turned on with the correct
channel selected.
GUIDE CHANNEL SET
GUIDE CH: 12
VCR CH : – – –
PRESS NUMBER KEY (0–9)
OR ( 5,∞), THEN (OK)
PRESS (PROG.) TO END
7
Return to normal screen
Press PROG. or OK.
“PROGRAM COMPLETED” appears on the
screen for about 5 seconds, then normal screen
appears.
• If “PROGRAM NOT COMPLETED PROGRAM
OVERLAP” appears, you have another program
overlapping the program you have just made.
The Program Check screen appears and
conflicting programs will start blinking.
You can now correct the conflicting programs.
See “When programs overlap each other” on
page 36.
8 Engage timer recording standby mode
Press TIMER.
The VCR turns off automatically and “‰” is
displayed on the front display panel.
To use the VCR while it is in timer recording standby
mode
Press TIMER to cancel the timer recording standby
mode, then press POWER to turn on the VCR.
DO NOT forget to put the VCR into timer recording standby
mode again by pressing TIMER after you use the VCR;
otherwise, you cannot record the broadcasts you want.
● When “AUTO TIMER” is set to “ON” (੬ pg. 37, 38) ,
the timer recording standby mode is automatically
engaged when the VCR is turned off. It is temporarily
canceled when the VCR is turned on. You do not have to
press TIMER to engage or disengage the timer recording
standby mode.