JVC CA-DXU20 - Manual (Page 19)

16
To adjust the picture tone
1 Select “USER1” or “USER2.”
• Follow steps 1 and 2 on page 15.
2 Select a parameter you want to adjust.
3 Adjust the parameter.
4 Repeat steps 2 to 3 to adjust other parameters.
To erase the VFP screen, press VFP again.
Changing the Display Brightness
* Excluding the KARAOKE SCORING lamp and VARIO
BASS lamp (if they are in use).
Setting the Clock
Without setting the built-in clock, you cannot use any timers
except the Sleep Timer.
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
1 Activate clock setting mode.
• If you have already adjusted the clock before, press the
button repeatedly until the clock time starts flashing.
2 Adjust the hour, then minute.
Now the built-in clock starts working.
To display the clock during playback
For “DVD/CD” and “USB”:
For “TAPE,” “TUNER AM,” “TUNER FM” and “AUX”:
GAMMA Adjust if the neutral color is bright
or dark. The brightness of dark and
bright portions is maintained
(–3 to +3).
BRIGHTNESS Adjust if the picture is bright or dark
as a whole (–8 to +8).
CONTRAST Adjust if the far and near position is
unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
DIMMER 1 Dims the display and the illumination* on
the main unit.
DIMMER 2 Dims the display (more than DIMMER 1)
and turns off the illumination* on the main
unit.
ENTER
/SET
ENTER
/SET
Remote
ONLY
DIMMER DIMMER 1 DIMMER 2
DIMMER OFF
(Canceled)
Remote
ONLY
INFO
CLOCK/
TIMER
ENTER
/SET
DISPLAY/
CHARA
Disc/file type Clock
Playback information
DISPLAY/
CHARA Current source information
Clock
DX-U20_9[U].book Page 16 Wednesday, March 4, 2009 10:59 AM