JVC 0405MWMMDWBET - Manual (Page 21)

18
Programming the Playing Order of the Tracks
—Program Play
You can arrange the order in which the tracks play before you
start playing. You can program up to 32 tracks.
Program play is not available to MP3 discs on this unit
There may be a malfunction in case that you try to do such
playback.
If a malfunction occurs, unplug the AC power cord and then plug it
back in.
On the remote control ONLY:
1
Load discs.
• If the current playing source is not the CD player, press
CD 6, then 7 before going to the next step.
2
Press PROGRAM/RANDOM
repeatedly until “PROGRAM”
appears on the display.
The PROGRAM indicator also lights up on
the display.
• If a program has been stored in memory, the program is
called up.
3
Press one of the disc
number buttons (CD1,
CD2, and CD3) to select the
disc number you want to play.
• When the selected disc number is an MP3 disc,
“MP3 DISC” appears on the display.
4
Press the number button(s) to
select the track number.
Ex.: For track number 5, press 5.
For track number 20, press +10,
then 10.
For track number 32, press +10,
+10, +10, then 2.
Each time you select a track, the selected track number is
added to the track number indicator.
• You can select up to the 99th track on each disc.
Track number
Disc number Program step number
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4.
• To program tracks from a different disc, repeat steps 3
and 4.
6
Press CD
6.
The tracks are played in the order you have
programmed.
To stop during play, press 7.
To exit from Program play, press 7 during play or
PROGRAM/RANDOM again before or after play.
The unit enters continuous playback. (The program you have
made is stored in memory until you turn off the unit, open the
carrousel, or erase the program.)
To modify the program
Before playing, you can erase the last programmed
track shown on the display by pressing CANCEL.
• Each time you press the button, the last
programmed track is erased from the program.
To add tracks in the program before play, simply select the
disc numbers and/or track numbers you want to add by
following steps 3 and 4 of the programming procedure.
To check the program before play, perform the following
procedure:
1 Press PROGRAM/RANDOM while Program play is
stopped.
2 Press ¢ or 4.
The programmed tracks appear on the display in the
programmed (or reverse) order.
• Pressing CD 6 starts Program play from the first track of
the program.
If you want to add tracks in the program after
checking the program
Press PROGRAM/RANDOM repeatedly until the PROGRAM
indicator appears on the display, then add tracks by following steps
3 and 4 of the programming procedure.
To erase the entire program, press 7 while Program play is
stopped.
• Turning the power off or ejecting the carrousel will also
erase the stored memory.
If you try to add another track when 32 tracks are
already programmed
“FULL” appears on the display.
If you have programmed a track from an empty tray,
or a track number that does not exist on the disc
Such program steps will be skipped and erased.
Continued
MXGC5[A]_18-19.p65 05.4.13, 5:12 PM 18