JVC WB-S681U - Manual (Page 10)

10
5.
Connect the cable.
Connect the cable to the
terminal block of the
ceiling attachment fitting.
6.
Mount the ceiling
attachment fitting on
WB-S685U.
(3 locations)
8.
Mount the camera to the
ceiling attachment fitting.
(For details, refer to the Instruction
Manual of the camera.)
9.
Install the ceiling panel.
Place and mount the ceiling panel
(accessory) on the hooks (x2)
of WB-S685U.
7.
Install the fall
prevention wire.
Screws (M4)
(Accessory)
Ceiling
attachment fitting
Cable
Ceiling panel
ⅷ Before installing, configure the settings
of the camera to be used.
ⅷ The camera’s fixed-lock knobs cannot
be locked.
ⅷ When mounting the camera, make
sure the camera’s fixed-lock knobs
(2 locations) are protruded and that
a click sound is heard.
ⅷ After installation, check that the
camera is securely installed using a
penlight. The camera may fall off if
the installation is not properly done.
Ensure that the cable is not caught in
between during installation.
Dome cover
Hook
Fall prevention wire
of the camera
Ensure that the fall prevention
wire is secured at the
positions shown above.
CAUTION
CAUTION
Do not damage the dome cover when
installing the ceiling panel.
CAUTION
CAUTION
5.
6.
7.
9.
Front side of camera
Fall prevention wire
8.
Improper
installation
Perfect
installation
Check the fixed-lock knob
position
WB-S685U Ceiling Recessed Bracket
(Not for USA and Canada)
(continued)