JVC KD-G400 - Manual (Page 32)

32
ENGLISH
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. See “To select the external component to
use—EXT IN” on page 26.
1
Select the external component
(LINE IN).
• If “LINE IN”* does not appear on the display, see
page 26 and select the external input (“LINE IN”).
* Displayed only when one of the following sources is
selected—FM, AM, and CD.
Note on One-Touch Operation:
When you press CD CD-CH, the power automatically
comes on. You do not have to press
to turn
on the power.
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound as you want. (See
pages 22 and 23.)
To use the JVC SIRIUS Radio, refer to the
SIRIUS Radio Setup Manual (separate
volume).
CD LINE IN*
EN32-32_KD-AR400_G400[J]f.p65 9/26/03, 4:20 PM 32