JVC KD-G400 - Manual (Page 18)

18
ENGLISH
Refer also to “CD OPERATIONS” on pages 13 to
16.
Playing an MP3 disc
1
Open the control panel.
Note on One-Touch Operation:
When a disc is already in the loading slot,
pressing CD CD-CH turns on the unit and starts
playback automatically.
2
Insert an MP3 disc into the loading
slot.
The unit turns on, draws
the disc and starts
playback automatically.
3
Close the control panel by hand.
All files will be played repeatedly until you
stop playback.
MP3 OPERATIONS
Notes:
• MP3 discs require a longer readout time.
(It differs due to the complexity of the folder/file
configuration.)
• When playback starts, folder and file names (or ID3
tags) will automatically appear. (See also page 19.)
• If you change the source or turn the power off, disc
playback stops (without ejecting the disc).
Next time you select the CD player as the source or
turn the power on, disc play starts from where
playback has been stopped previously.
The display changes to show the following:
Ex.: When the disc contains 19 folders
and 144 MP3 files
Total file
number Total folder
number
CD indicator
Current source indication
MP3 indicator
EN17-21_KD-AR400_G400[J]f.p65 9/26/03, 4:21 PM 18