Basic playback, Playback features, High-speed search – JVC LPT0923-001B User Manual
Page 40: Still picture/frame-by-frame playback, Slow motion, Skip search, Basic playback playback features
Filename [DR-MH30EU_06HDD Operation.fm]
Masterpage:Left+
40
EN
BASIC OPERATIONS ON HDD DECK
Page 40
Tuesday, 29 June 2004 17:40
1
Press HDD so that the HDD lamp lights up on the unit.
2
Press 4 to start playback.
● The Library Database Navigation also enables you to search and
select the desired programmes. (
3
Press 9 to pause playback.
● To resume normal playback, press 4.
4
Press 8 to stop playback.
NOTE:
When the Library Database Navigation screen appears, choose a
thumbnail image of the desired title on the TV screen, then press
SELECT(4) or ENTER. (
High-Speed Search
During playback, press 5 for forward high-speed search, or 3
for reverse high-speed search.
● Each press of the button increases the search speed for each
direction.
● To resume normal playback, press 4.
Still Picture/Frame-By-Frame Playback
1
Press 9 to pause during playback.
2
Press SLOW – (3) or SLOW + (5) to activate frame-by-
frame playback.
● Each press of SLOW – (3) or SLOW + (5) advances/reverses
the still picture frame by frame.
● To resume normal playback, press 4.
Slow Motion
1
Press 9 to pause during playback.
2
Press SLOW – (3) or SLOW + (5) for 2 or more seconds.
● Each press of SLOW – (3) or SLOW + (5) increases the slow
motion speed for each direction (from 1/16 to 1/2 times the normal
speed).
Skip Search
During playback, press
.
● Each press initiates an approximately 30-second period of fast-
motion playback. Normal playback resumes automatically.
Basic Playback
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
ATTENTION:
● It may take a few seconds to start playback. This is not a
malfunction.
● Forward/reverse high-speed search and other operations cannot
be performed while playback is stopped.
8
4
9
HDD
ENTER
8
4
SELECT
9
HDD
CABLE/SAT
DVD
TV
Playback Features
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
● Press HDD so that the HDD lamp lights up on the unit.
HDD
9
4
5/SLOW +
3/SLOW -
CABLE/SAT
DVD
TV
DR-MH30EU_00.book Page 40 Tuesday, June 29, 2004 5:41 PM