beautypg.com

Cator, A pg. 22, Resume) – JVC xv-thm45 User Manual

Page 27: Playback

background image

Playback

22

NOTE
• You can also start playback by pressing 3 (play button) or DVD.
• Regardless of the operation for starting playback, the system plays

back all available discs sequentially until you stop playback.
However, the system stops playback after playback of the disc in the
fifth tray.

• When Video CDs/SVCDs with PBC function (

A pg. 4) or DVD that

automatically go to the menu screen and wait for the next instruction,
the system does not move to the next disc. In such a case, select the
item to be played back from the menu. (

A pg. 37)

• You can check playback information on the display window and the

TV screen. (

A pg. 35)

• Some tracks on an MP3 disc may be skipped or may not be played

back normally.

• When you play back a JPEG disc, press buttons after the whole

picture appears on the TV screen. The system cannot accept
operations even though you press buttons while showing a picture.

• Some files on a JPEG disc may be played back distortedly.
• If a black screen continuously appears in the slide-show playback, the

file currently being played may be a non-baseline JPEG file. In this
case, select a playable file (a baseline JPEG file). For example, press
7 or MENU to open the JPEG control display, etc. Note that it may
take a long time to select another file.

7

Resume Playback (DVD/Video CD/SVCD only)

When Resume Playback is set to “ON” (

A pg. 53) and you stop

playback by the following operations, the position where playback
has been stopped is stored. (The RESUME indicator lights.)
• Turning off the power (

A pg. 17)

• Pressing 7
• Changing the source (

A pg. 18)

To start playback from the stored position
(The RESUME indicator goes off.)
• Press the selected DISC button or 3 (play button) on the remote

control or the center unit.

• Select DVD as the source again if you changed the source.

To clear the stored position
Press 7 again or open the disc tray with the playback disc.
• When the stored position has been cleared, playback starts from

the beginning of the disc.

7

To prevent screen burn-out with the screen saver

A TV screen may burn out if a static picture is displayed for a long
time. To prevent this, the system automatically dims the screen if a
static picture is displayed for over 5 minutes (the screen saver
function).
• Pressing any button will cancel the screen saver function.
• If you do not want to use the screen saver function, see page 51.

7

On-screen guide icons

During DVD playback, the following guide icons may appear for a
while on the TV screen;

: appears at the beginning of a scene containing multi-

subtitle languages.

: appears at the beginning of a scene containing multi-audio

languages.

: appears at the beginning of a scene containing multi-angle

views.

(Play),

(Pause),

/

(Fast forward/

fast-reverse),

/

(Slow-motion forward/

reverse): appears when you perform each operation.

• If “B” appears on the TV screen when pressing a button, the disc

cannot accept an operation you have tried to do or information
required for that operation is not recorded to the disc.

NOTE
• In some cases, without showing “B”, operations will not be accepted.
• If you do not want the on-screen guide icons to appear, see page 53.

7

Playback information on the display window

DVD
Example: When a DVD encoded with Dolby Digital 5.1ch is played

Video CD/SVCD/Audio CD
Example: When a Video CD is played back

NOTE
• When a Video CD or SVCD with PBC function is played, the elapsed

playing time does not appear, but “PBC” appears.

MP3 disc

JPEG disc

Signal and speaker indicators

Chapter number

Elapsed playing time

(hour:minute:second)

Surround mode and digital signal format

Disc indicators

Title number

Each time FL DISPLAY is pressed, the indications
alternate between those shown above and below.

Chapter number

Track number

Elapsed playing time (minute:second)

Signal and speaker

indicators

Disc indicators

Track number

Elapsed playing time (minute:second)

(during playback only)

Group number

Track number

Each time FL DISPLAY is pressed, the indications
alternate between those shown above and below.

Signal and speaker

indicators

Disc indicators

MP3 indicator

Group number

Disc indicators

File number

Continued on next page

TH-M45[B]-05Basic.fm Page 22 Wednesday, April 16, 2003 4:52 PM

This manual is related to the following products: