Cv-m50ir – JAI CV-M50IR User Manual

Page 18

Text mode
Original mode

- 17 -

CV-M50IR

7.4. Location of SW2 and Jumpers

Jumpers are shorted with a 0 Ohm resistor or by a soldering between the 2 points. To remove the solder
tin from a jumper position, use a special tin remover such as de-soldering wick.

7.4.1. Board PK8054 Side B

7.4.2. Board PK8057 Side A

4 %

JP10 JP2 JP1 SW2

JP6 JP7

JP9 JP12 JP4 JP11 JP3

JP5 JP8