JVC BR-HD50E - Manual (Page 84)

E-80
OTHERS
Warning display (continued)
„ Warning display (Displayed regardless of the DISPLAY mode)
When a warning display appears, BR-HD50 stops operation and ceases to accept any operation
command. When TAPE DEFECTIVE (5605 - 5609) is displayed, the unit similarly stops all opera-
tions except EJECT operation.
Memo
This unit uses a microcomputer. It may not function correctly if there is external noise. If this happens,
please turn off the power and then on again.
Display Status Action
WARNING 0201
CONDENSATION ON
DRUM Condensation. Leave the power on and wait for the
display to disappear.
WARNING 3200
LOADING FAILURE Unable to load tape. This error can be resolved by turning
off and then on the power. However,
doing so may damage the tape in
some cases. Consult your JVC
authorized dealer.
WARNING 3300
UNLOADING FAILURE Unable to eject tape.
WARNING 4100
CASSETTE EJECT
FAILURE Eject error. Is a heavy object on the unit?
DEFECTIVE TAPE!
5605 - 5609 Broken tape. Press the EJECT button to remove
and replace the tape.
WARNING 5702
TAPE END DET.
ERROR! Tape-end sensor error. This error can be resolved by turning
off and then off the power. However,
doing so may damage the tape in
some cases. Consult your JVC
authorized dealer.
WARNING 5802
TAPE BEGIN DET.
ERROR! Tape-beginning sensor error.
WARNING 7001
DRUM MOTOR
FAILURE Drum rotation error.
WARNING 7101
CAP MOTOR FAILURE Capstan rotation error.
WARNING 7202 - 7203
SUPPLY REEL
FAILURE Supply reel rotation error.
WARNING 7302 - 7303
TAKE UP REEL
FAILURE Take up reel rotation error.
WARNING 7305
TAKE UP REEL
FAILURE Tape winding error during unloading.
WARNING 7401
REEL MOTOR
FAILURE Reel motor rotation error.