JVC BR-HD50E - Manual (Page 48)

E-44
RECORDING
Adjusting audio recording level
The analog audio recording level can be adjusted on this unit. There are two adjustment methods,
selected using A.REC VR.MD.: DV in the AUDIO Menu screen.
The audio recording level can be set to the initial setting value. (UNITY mode)
Memo
Audio input level from the IEEE1394 terminal cannot be adjusted.
„ Set “Q, S” KEY FUNC. in the SYSTEM [1/2] Menu screen to VAR/RECV.
„ Select an adjustment method using A.REC VR.MD.: DV in the AUDIO Menu screen.
BOTH : The audio recording level for both CH1 and CH2 are adjusted simultaneously.
INDEPEND : The audio recording level for CH1 and CH2 are adjusted separately.
„ Hide the Menu screen.
„ This can be adjusted in the STOP or REC mode. Watching the audio level indicator
on the front panel, adjust so that the far right LED is turned off.
„ Increasing the recording level
Press the R button while holding down the Q or S button. The
audio recording level for both CH1 and CH2 increases.
„ Decreasing the recording level
Press the P button while holding down the Q or S button. The
audio recording level for CH1 and CH2 decreases.
Settings
Adjusting audio recording level
Simultaneously adjusting both channels (BOTH)
Adjustment buttons Audio level indicator