JVC GET0626-001A - Manual (Page 16)

16 ENGLISH
Listening to the satellite radio
Before operating, connect either one of
the following systems (not supplied) to the
expansion port on the rear of this unit.
For listening to a SIRIUS Satellite radio:
• SC-C1 and KS-SRA100
• PnP, SC-VDOC1 and KS-SRA100
For listening to an XM Satellite radio:
• JVC Smart Digital Adapter (XMDJVC100)
• CNP2000UC and CNPJVC1
• For details, refer also to the instructions
supplied with the other components.
GCI (Global Control Information)
update
• If channels are updated after subscription,
updating starts automatically. “UPDATING”
flashes and no sound can be heard.
• Update takes a few minutes to complete.
• During update, you cannot operate your
satellite radio.
Changing the display information
Call Sign * 1 = Frequency =
Title/artist/album name of the
current segment *
2 = Clock =
(back to the beginning)
* 1 “ **** -FM” or “ **** ” appears when no Call Sign
is received.
* 2 “NO TEXT” appears when no text is received.
~
] “SIRIUS” or “XM”
Ÿ
] Select a category.
SIRIUS: If you select “ALL,” you can
tune in to all the channels of all
categories.
!
] Select a channel to listen.
Holding the button changes the
channels rapidly.
While searching, invalid and
unsubscribed channels are skipped.
XM: If you do not select a channel
within 15 seconds, category selected
in step Ÿ is canceled. You can select
all channels of all categories now
(including non-categorised channels).
• This setting cannot take effect for the
conventional FM/AM stations.
• If the radio station forces the reception mode
to digital, the HOLD indicator flashes.
Using the remote controller
5 U / D ∞ : Changes the preset
stations
2 R / F 3 : Searches for stations
EN10-19_KD-A315_R310[J]4.indd 16 EN10-19_KD-A315_R310[J]4.indd 16 9/15/09 3:39:03 PM 9/15/09 3:39:03 PM