JVC GD-V502PCE - Manual (Page 32)

32
Select Signal from the “Setup” menu during RGB input signal.
Press to adjust.
Setting RGB sync signal:
Confirm that the input is set to RGB input (this setting is valid only for RGB input
signal).
H & V: The H and V sync signals are input from the HD/VD connector.
on G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
CS: Uses a synchronized signal of Composite Sync input.
Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB input and PC input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
H-Freq. (kHz)/V-Freq. (Hz)
Setup for input signals
Sync
Press to exit from adjust mode.
Press (ACTION) button
Sync H & V
Sync CS
Sync on G
H-Freq. kHz
V-Freq. Hz 31.5
60.0
Signal [ RGB ]
Sync
H-Freq. kHz
V-Freq. Hz
H & V
31.5
60.0
Setup 1/2
Signal
Screensaver
Input label
Component/RGB-in select
RGB
RGB1
OSD Language English (UK)
Power save Off
Standby save On
Power management Off
R