JVC HR-VCD1 - Manual (Page 7)

7
English
TV Multi-Brand Remote Control
Controls, Indicators and Terminals (cont’d)
Control Your TV Using Additional Buttons
Your remote control can operate the basic functions of your TV
set. In addition to JVC TVs, other manufacture’s TVs can also
be controlled.
Before you start...
¶
Turn on the TV using its remote control.
¶ Press the TV button on the remote control.
The NUMBER keys on the remote control can also be used to
select the TV’s channel by setting the remote control to the TV
mode.
1 Press the TV button.
2 Use the NUMBER keys, and the DIGIT ENTRY (NUMBER
10) button, the NUMBER +10 button or the OSD button to
select the TV’s channel.
¶ DIGIT ENTRY (NUMBER 10) button corresponds to the 1-
digit/2-digit entry switching button (often labelled –/– –) of
your TV’s remote control.
¶ NUMBER +10 button corresponds to the 10 + button, and
the OSD button corresponds to the 20 + button of your TV’s
remote control.
NOTE:
• The way these buttons are used is determined by your TV.
Use these buttons as instructed for your TV’s remote control.
TV BRAND NAME CODE
JVC 01
AIWA 10
BEIJING 05, 27
CHANGHONG 05, 06, 16, 25
DAEWOO 11
FERGUSON 15
FINLUX 20
FUNAI 09
GOLDSTAR 13
GRUNDIG 17
HITACHI 07
ITT 18
JINXING 23
KONKA 26
MITSUBISHI 06
MIVER 19
NEC 22
NOBLEX 27
NOKIA 21
PANASONIC 02
PEONY 23, 24, 25
PHILIPS 16
SAMSUNG 12
SANYO 08
SHARP 04
SONY 03
TCL 16, 28
THOMSON 14
TOSHIBA 05
TV VCD VHS
1
4
7
10
2
5
8
0
3
6
9
+10
DISC 1
DISC 2
DISC 3
OSD
PROGRAM REPEAT VIDEO INTRO MPX
TRACKING ON/OFF
CANCEL RANDOM HIGHLIGHT RETURN
KARAOKE SEARCH
PREV SELECT NEXT
REW
REC PLAY
STOP FF
PAUSE/STILL
SP/LP
MANUAL
SEARCH
TV/VIDEO
KEY CONTROL
TV VOL
TV VOL TV
PROG TV
PROG
TV PROG
–/+ buttons
TV VOL
–/+ buttons
MUTE
button
OSD button NUMBER
10 button
TV button
STOP
button
TV/VIDEO
button
NUMBER
keys
NUMBER + 10
button
(POWER)
button
NOTE:
• If your TV is a JVC, you don’t have to set the code in step 1.
Go to step 2.
1 SET TV BRAND CODE
Refer to the chart below. While holding down TV, enter your
TV’s brand code using the NUMBER keys, then press STOP.
¶
You don’t have to repeat this step until you replace your
remote control’s batteries.
2 TRY OPERATING TV
Press on the remote control to turn the TV off. If it goes
off, try other operations.
¶ The button, TV/VIDEO button, TV PROG -/+ but-
ton, TV VOL -/+ button and MUTE button on the
remote control can all be used to operate the TV.
IMPORTANT
Although the provided remote control unit is compatible with
JVC televisions, as well as many other models, it may not work
with your TV, or in some instances, may have limited function
capability.