JVC TH-D5 Series - Manual (Page 30)

27
SPK.SETTING menu is available only when the speaker position mode is set to “S.SPK R” ( 13).
Speaker setting menu (SPK.SETTING)
LEVEL Adjust the output level of each speaker while monitoring the test tone.
FRONT LEFT/RIGHT SPEAKER, CENTER SPEAKER, SURROUND RIGHT/LEFT
SPEAKER: Select the speaker, then adjust the output level.
TEST TONE: Turns on/off the test tone.
DELAY Adjust the delay time of the speakers.
FRONT LEFT/RIGHT SPEAKER,
CENTER SPEAKER, SURROUND
RIGHT/LEFT SPEAKER: Select the
speaker, then adjust the distance from
the listening position to the speakers.
• 1 ms increase (or decrease) in delay time
corresponds to about 30 cm decrease (or
increase) in distance.
• Set to 0 ms for the furthest speaker from
your position as the basis for the delay time
setting.
SUBWOOFER Make the subwoofer settings.
LEVEL: Adjust the output level of the subwoofer.
CROSS OVER: Select an appropriate crossover frequency according to the size of the
cone speaker unit built into the small speaker connected.
120Hz: Select this when the cone speaker unit size is 8 cm or more.
150Hz: Select this when the cone speaker unit size is between 6 cm and 8 cm.
200Hz: Select this when the cone speaker unit size is 5 cm or less.
Other setting menu (OTHERS)
Front left
0 ms
Center
1 ms
Ex.: Subwoofer
Surround right
2 ms
Front right
0 ms
2.1 m
2.4 m
2.7 m
3.0 m
Surround left
2 ms
RESUME Activate (ON) or deactivate (OFF) the resume function.
ON SCREEN GUIDE Activate (ON) or deactivate (OFF) the on-screen guide icons.
DivX REGISTRATION The System has its own Registration Code for DivX playback. You can confirm the code of
your System.
• Once you play back a DivX file created by using the Registration Code, the System’s code
is overwritten by a totally different new one for copyright protection purposes.
Underlined items are the
initial settings. Personal settings
TH-D7D5[U]EN.book Page 27 Wednesday, June 13, 2007 10:19 AM