Ipod playback – JVC TH-D5 Series User Manual
Page 19
16
Starting playback
Be sure to reduce the volume on the System to the
minimum level before connecting an iPod. Adjust the
volume after playback has started.
1
Connect an iPod while the System is turned off.
• Connect the plug with the arrow-mark side facing up.
2
Turn on the System, then select “IPod” as the
source. (
12)
“CONNECT” appears on the display. If an iPod is not
connected firmly, “NO CONNE” appears.
3
Start playing the iPod.
• Press 3 (play button) again if the iPod does not start
playback.
Play/pause/search/skip
*
Operate on your iPod to skip to the next/previous item while
playing back a video.
• The iPod enters sleep mode when you turn off the System
or select another source.
• To show still pictures in the iPod, play them back in slide-
show mode on the iPod.
DO NOT connect or disconnect the iPod when the
System is turned on.
DO NOT touch the iPod terminal pins or the
connector pins.
When the iPod is not charged through the System,
the iPod may not be turned on from the System.
If the sound is distorted when audio sources with
high recording levels are played, you are
recommended to deactivate the equalizer on your
iPod.
To view a video/picture from the iPod on the TV,
connect the System to the TV via the composite or S-
video jacks. (
9)
You cannot send any data to your iPod from the
System.
To disconnect the iPod cable from the
iPod, press the buttons on the sides,
then pull it out.
The iPod battery is charged only when
“IPod” is selected as the source.
If the iPod which is not listed in “Playable digital devices”
(
3) is connected, the iPod may not be operated from
the System. In this case, deactivate the iPod battery charge
function so that the iPod may be operated, but the iPod
cannot be charged through the System.
To use the battery charge function, perform the above
procedure again. “P.ON” appears on the display.
Set the remote control mode before
operation.
Before selecting the video
source to play
Make the appropriate setting for
video output on the iPod.
Stand for iPod (supplied)
Connection cable for
iPod (supplied)
To do
Start playback
Pause
Fast-forward/fast-reverse
search within the current
track
Skip to the next/previous
item*
To deactivate the battery charge function
«
Hold
«
Hold
“P.OFF” appears on the display.
«
Hold
iPod playback
TH-D7D5[U]EN.book Page 16 Wednesday, June 13, 2007 10:19 AM