beautypg.com

Jura Capresso E75 User Manual

Page 10

background image

10

Never use water-soluble instant coffee or quick coffee. We
recommend that you only use powder from freshly ground
coffee beans or pre-ground, vacuum-packed coffee. Never
put more than 2 portions of coffee in. The filler funnel is
not a storage container.
Make sure that the coffee powder
which you use is not ground too finely. This can lead to
blockages, and the coffee then only runs through drip by
drip.

If draw-off key

is pressed by mistake, the selection can

be cancelled by pressing thee selection can be cancelled by
pressing the rinsing key

. Your machine rinses.

After drawing off powder coffee, we recommend that you re-
gularly clean the filler funnel with a clean bottle-cleaning
brush.

8. Drawing off steam

The steam can be used for heating liquids and also for frothing
milk for cappuccino. Make sure that the frothing aid (15) is pushed
upwards when heating liquids. When frothing liquids, push the
frothing aid downwards (Fig. 5).
Ⅲ Place a cup under the pivoting nozzle (14).
Ⅲ Immerse the frothing aid (15) into the milk to be frothed or the

liquid to be heated and turn the steam/hot water rotary button
(13) to the position

(Fig. 5).

STEAM

Ǟ ǟ WATER / SELECT PRODUCT

Ⅲ Press the key ̈.

STEAM INTAKE / PLEASE WAIT

STEAM INTAKE

Ⅲ When you have reached the required quantity of steam, turn the

steam/hot water rotary knob back to the position

.

STEAM INTAKE / SELECT PRODUCT

Ⅲ If you would like to draw off a coffee immediately after the

steam, please proceed as described in point 8.1.

The max. draw-off time is about 4 minutes.
A little water will come out first when frothing. It can be let
off before actually drawing off steam. The good result, e.g.
when frothing milk, is not influenced in any way.

At the start of a steam draw-off, there can be splashes. The
pivoting nozzle gets hot. Please avoid direct contact with the
skin.

8.1 Return to stand-by

Ⅲ Place a vessel under the pivoting nozzle (14).

STEAM READY / SELECT PRODUCT

Ⅲ Press a draw-off key.

OPEN TAP

SYSTEM FILLING / PLEASE WAIT

CLOSE TAP

After each steam draw-off, clean the pivoting nozzle with a
damp cloth.

9. Drawing off hot water

Ⅲ Place a cup under the pivoting nozzle (14) and turn the steam/hot

water rotary knob (13) to the symbol .

STEAM

Ǟ ǟ WATER / SELECT PRODUCT

Ⅲ Press the key ̇.

WATER INTAKE

This manual is related to the following products: