JVC AV 27230 - Manual (Page 21)

21
Initial Setup
Channel Summary
Channel Summary allows you to customize the line-up of channels received by your TV. You can
add or delete channels from the line-up or prevent any unauthorized viewers from watching any or
all 181 channels.
Press the M ENU button
➐❷ To CHANNEL SUMMARY
➛❿
To operate
The Channel Summary screen (below) will now be displayed with the channels set to scan marked
with an "X". You can delete channels from the scan by removing the "X". If any channels were
missed during Auto Tuner Setup and you wish to add them, you may by placing an "X" next to the
channel number.
➐❷ To the ADD column
➛❿
To include or delete from scan
E XIT when finished
You can block access to a channel by activating the Channel Lock.
➐❷ To CHANNEL SUMMARY
➛❿
To operate
➐❷ To the Lock Column
Z ERO to lock or unlock that channel
E XIT when finished
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the
Lock Code using the 10 key pad.
If the wrong code is entered, the message “INVALID
LOCK CODE!” will flash on the screen:
The channel cannot be accessed until the correct
code is entered.
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 29.
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
CH
02 X
X
X
X
X
01
03
04
05
ADD CH
06
07
08
09
10
ADD
:
:
:
:
:
:
FD mini-IB 1/16/01 3:33 PM Page 21