Connection to a personal computer – JVC GR-DA30U User Manual

Page 30

Editing

Connection To A Personal

Computer

When connecting the camcorder to a PC
using a DV cable, make sure to follow the
procedure below. Connecting the cable
incorrectly may cause malfunctions to the
camcorder and/or the PC.

• Connect the DV cable fi rst to the PC, and

then to the camcorder.

• Connect the DV cable (plugs) correctly

according to the shape of the DV connector.

It is also possible to transfer moving
images to a PC with a DV connector by
using the software equipped with the PC or
commercially available software.If you are
using a Windows

XP, you can use Windows

Messenger to conduct video conferences over
the Internet, using a camcorder. For details,
refer to the help for the Windows

Messenger.

Notes:
• It is recommended to use the AC Adapter

as the power supply instead of the battery
pack (

੬ 11).

• When using a DV cable, be sure to use the

optional JVC VC-VDV206U or VC-VDV204U
DV cable depending on the type of DV
connector (4 or 6 pins) on the PC.

• The date/time information cannot be captured

into the PC.

• Refer to the instruction manuals of the PC and

Software.

• The system may not work properly depending

on the PC or capture board you are using.

• If, after connecting a DV cable to the

camcorder and it doesn’t work, restart the
camcorder.

• Microsoft

and Windows

are either registered

trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.

To DV IN/OUT

Core fi lter

DV cable

(optional)

PC with DV connector

To DV
Connector

GR-DA30US_EN.indb 30

7/11/2007 6:00:35 PM