Connections to a tv or vcr – JVC GR-DA30U User Manual

Page 18

Recording & Playback

Connections To A TV Or VCR

1 Yellow to VIDEO IN (Connect when your

TV/VCR has only A/V input connectors).

2 Red to AUDIO R IN

3 White to AUDIO L IN

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as

shown in the illustration.
If using a VCR, go to step

If not, go to step

Connect the VCR output to the TV input,

referring to your VCR’s instruction manual.

Turn on the camcorder, the VCR and the

TV.

Set the VCR to its AUX input mode, and

set the TV to its VIDEO mode.

Start playback on the camcorder (

੬ 16).

• Please set “16:9 OUTPUT” of Playback

Menus so that the image may suit your TV
(16:9 TV or 4:3 TV) (

੬ 21, 23).

To choose whether or not the following
displays appear on the connected TV
• Date/Time

Set “DATE/TIME” to “ON” or “OFF” (

੬ 21).

• Time

Code

Set “TIME CODE” to “ON” or “OFF” (

੬ 21).

• On

Screen

Set “ON SCREEN” to “OFF”, “LCD” or
“LCD/TV” (

੬ 21).

Notes:
• It is recommended to use the AC Adapter as

the power supply instead of the battery pack.
(

੬ 11)

• To monitor the picture and sound from the

camcorder without inserting a tape, set the
camcorder’s Power Switch to “REC”, then set
your TV to the appropriate input mode.

• Make sure you adjust the TV sound volume to

its minimum level to avoid a sudden burst of
sound when the camcorder is turned on.

• Conversion lens and AV Cable may not be

used at the same time depending on the type
of conversion lens you are using.

• It is recommended to use JVC conversion lens.

Some conversion lens may not be compatible
with this camcorder.

To AV
connector

Audio/Video cable
(provided)

VCR

GR-DA30US_EN.indb 18

7/11/2007 6:00:28 PM