JVC GR-DA30U - Manual (Page 12)

12
EN Getting Started
MAX TIME
115min
LEVEL
0
50
100%
BATTERY CONDITION
LANGUAGE
ENGLISH
1 Select
2 SET
CLOCK ADJ.
MONTH. DATE. YEAR 12h
2 : 10 AM
JAN. 3. 2007
1 Select
2 SET
Data Battery System
You can check the remaining battery power
and the recordable time.
1 1
Set the Power Switch to “REC” or “PLAY”
(
੬ 9) .
2 2
Press DATA, and the battery status screen
appears.
• Press DATA again to return to the normal
screen.
• Data battery status cannot be displayed
during playback or while recording is in
progress.
• If “COMMUNICATION ERROR” appears
instead of the battery status even though
you tried to press DATA several times, there
may be a problem with your battery. In such
a case, consult your nearest JVC dealer.
Using AC Power
Perform step 4 4 in “Charging The Battery Pack”
(
੬ 11).
Language Settings
The language on the display can be changed
(
੬ 22).
1 1
Set the Power Switch to “REC” or “PLAY”
(
੬ 9) .
• If set to “REC”, the recording mode should
be set to “ M” (
੬ 9).
2
Press MENU.
3
Select “SYSTEM”, press SET or .
4
Select “LANGUAGE”, press SET or .
5 5
Select the desired language, press SET or
.
6 6
Press MENU.
Press whenever you want to return to the
previous menu screen.
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
(
੬ 21, 23).
Perform steps 1 – 2 2 in “Language Settings”
(
੬ 12).
1
Select “DISPLAY”, press SET or .
2
Select “CLOCK ADJ.”, press SET or .
3 3
Select the desired date display format,
press SET or .
• Repeat this step to input time display
format (Select from “24h” or “12h”), month,
date, year, hour and minutes.
4 4
Press MENU.
Press whenever you want to return to the
previous menu screen/setting.
2
3
4
Date/Time Settings
1
2
GR-DA30US_EN.indb 12 GR-DA30US_EN.indb 12 7/11/2007 6:00:23 PM 7/11/2007 6:00:23 PM