JVC Procision DLA-HD950 - Manual (Page 50)

5 Troubleshooting
50
Replacing the Lamp (Continued)
After replacing the lamp, reset the lamp time.
1
Insert the power plug to the power
outlet
2
Must operate with the remote control
in the standby mode (the projector is
powered, but is not turned on).
● Press in the order as shown.
● Press each button within 2-second intervals and press the last
button for 2 seconds or more.
● [STANDBY/ON] indicator and [LAMP] indicator blink alternately for
3 seconds. After that, the unit switches to standby mode.
BACK
TEST LIGHT
ASPECT HIDE
PC
HDMI 1
VIDEO
HDMI 2
S-VIDEO
COMP.
LENS
STAND BY
MENU
CINEMA
3
GAMMA C.TEMP
USER2 THX
LENS.
AP.
PIC.
ADJ.
PICTURE MODE
INPUT
CINEMA
1
CINEMA
2
NATURAL STAGE DYNAMIC
USER1
ON
Resetting Lamp Time
W ARNING
LAMP
ST ANDBY/ON
● Reset the lamp time only when you
have replaced the lamp.
● Never reset the service time w hen
the lamp is still in use. Otherwise,
the approximate standard for gauging
replacement time may be inaccurate
and lamp blowout may occur.
Press for 2 seconds or more
Light on (Red)
HIDE
BACK
OK
CAUTION