Picture adjust > lens aperture, Input signal > hdmi, English – JVC Procision DLA-HD950 User Manual
Page 35: Lens aperture, Reset, Hdmi, Reset the setting, Abbreviation cec: consumer electronics control
ENGLISH
35
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others
* About “Color Management Adjustment”
1 Set the picture mode of the color management.
2 Select the color to be adjusted by color management. 3 Select color adjustment.
4
Select the “Hue”, “Saturation” or “Brightness” using the / button.
5
Use the / button to adjust.
●
You can switch between “Before” and “After” using the [TEST] button of the remote control.
6
To end
●
After selecting “Cinema 1”, “Cinema 2”, or “Cinema 3” from “Picture Mode”, and after adjusting “Advanced”, adjustment of
brightness in each “Color Management” mode is not possible.
Picture Adjust > Lens Aperture
09
Lens Aperture
(Dark) -15 to 0 (Bright)
10
Reset
Reset the setting.
Input Signal > HDMI
11
HDMI
Configures HDMI input signal.
Input
Auto
Automatically configures the input signals.
Standard
Select this when the dynamic range of the input images is
16-235.
Enhanced
Select this when the dynamic range of the input images is
0-255.
Color Space
Auto
Automatically configures the input signals.
YCbCr(4:4:4)
Select this when the Y Cb Cr(4:4:4) video signals are
input.
YCbCr(4:2:2)
Select this when the Y Cb Cr(4:2:2) video signals are
input.
RGB
Select this when the RGB video signals are input.
Control with HDMI
On
Enables CEC communications.
Off
Disables CEC communications.
●
The setting is available only if the HDMI terminal is selected.
●
For some source devices,“Auto (input)” will not function properly. In such cases, please use Standard Mode or Enhanced
Mode.
●
Abbreviation
CEC: Consumer Electronics Control
>
0
0
0
Color Management
Off
Custom1
Custom2
Custom3
Pause
Red
Yellow
Green
Cyan
Blue
Magenta
Hue
Saturation
Brightness
Exit
MENU
BACK
Back
Select
Operate
TEST
Check Before
Picture Ad
just
All Reset
Off
>
0
0
0
Picture Ad
just
Color Management
Off
Custom1
Custom2
Custom3
Pause
Off
Red
Yellow
Green
Cyan
Blue
Magenta
All Reset
Hue
Saturation
Brightness
Exit
MENU
BACK
Back
Select
Operate
TEST
Check Before
7
Hue
Check
TEST
After
Yes
No
Save Color Management?
BACK
BACK
BACK
OK