JVC Everio GZ-HM400 - Manual (Page 36)

EN
1
Touch MENU.
2
Select the desired menu.
3
Select the desired setting.
Changing the Menu Settings
FURTHER INFORMATION
To return to the previous screen
Select @.
To quit the screen
Select [QUIT].


Troubleshooting
Trouble Action
P
o
wer
No power is supplied.
•
Connect the AC adapter correctly.
•
Recharge the battery pack.
The power/charge lamp
blinks when the LCD
monitor is closed.
•
[QUICK RESTART] is set to [ON].
• The battery is being charged.
Displa
y
The remaining battery
display is not correct.
•
Fully charge the battery pack, run it down, and then recharge it
again.
• If the camcorder is used for long periods of time in high or low
temperatures, or if the battery pack is repeatedly charged, the
amount of remaining battery may not be displayed correctly.
The LCD monitor is
difficult to see.
•
The LCD monitor may be difficult to see if used in bright areas
such as under direct sunlight.
Before requesting service, consult the following chart. If the solutions indicated in the chart do not
solve the problem, consult your nearest JVC dealer or JVC service center for instructions.
Refer also to the FAQ of new products on JVC’s website.
The following phenomena are not malfunctions.
•
The camcorder heats up when it is used for a long time.
•
The battery heats up during charging.
•
When playing back a video, the image stops momentarily or the sound is interrupted at junctions
between scenes.
•
LCD monitor momentarily become red or black when sunlight is recorded.
•
Black spots, or red, green, or blue spots appear on the LCD monitor.
(The LCD monitor contains 99.99% effective pixels, but 0.01% or fewer pixels may be ineffective.)
FUR
THER INFORMA
TION