JVC GC-A33 - Manual (Page 12)

EN-
12
Attaching the Hand Strap
Use the included hand strap every time to carry the camera and when taking pictures
outdoors.
To start taking pictures:
1. Turn the camera on by pressing the Power
button.
2. As the camera warms up, the Status light
indicator at the back of the camera lights in
green.
3. Since this is the first time your camera is
powered on, it automatically defaults to
Record mode. You will see the
icon on
the LCD panel.
Note
If you have switched to other modes, you can
change back to Record mode by pressing the
Mode/Menu button. You have to press and
then quickly release this button.
4. Using the Viewfinder, focus on the object
you want to capture.
5. Press the Shutter button to take the picture.
To attach the strap to your camera:
1. Insert the small loop at the end of the strap
into one of the holes of the camera’s strap
holder.
2. Push inward until the loop comes out of the
other hole of the camera’s strap holder.
3. Insert the other end of the strap through the
loop and pull it all the way until the strap is
securely attached to the camera.
Taking Pictures
1 4 2
3
5
Note
When using the hand strap, take care that the camera is not bumped or entangled.