Av compu link remote control system, English – JVC RX-8010VBK User Manual

Page 50

English

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player)
through the receiver.

This receiver is equipped with the AV COMPU LINK-III, which added a function to operate JVC video components through the video
components terminals. To use this remote control system, you need to connect the video components you want to operate, following the
diagrams below and the procedure on the next page.

CONNECTIONS 1: AV COMPU LINK Connection

COMPU LINK III

COMPU LINK

VHS

COMPU LINK

COMPU LINK EX

DVD

COMPU LINK III

IMPORTANT:

The AV COMPU LINK remote control system cannot control the
DBS tuner connected to the TV SOUND/DBS and DBS component
video terminals, and video components connected to the VIDEO
and VCR 2 terminals on the receiver.

CASE 1

When connecting the source equipment to the receiver using the S-video terminals, connect also this
receiver to the TV’s Video Input 1 terminal using S-video cables.

Note:

If you connect the DVD player and the DBS tuner to this receiver using the S-video terminals, change the video input
terminal setting to "S/C" (see page 16).

When connecting the source equipment to the receiver using the composite video terminals, connect also
this receiver to the TV's Video Input 2 terminal (composite video input) using composite video cables.

Note:

If you connect the DVD player and the DBS tuner to this receiver using the composite video terminals, change the video
input terminal setting to "S/C" (see page 16).

When connecting the source equipment to the receiver using the component video terminals, connect also
this receiver to the TV's Video Input 2 terminals (component video input) using component video cables.

Note:

If you connect the DVD player and the DBS tuner to this receiver using the video component terminals, change the
video input terminal setting to "COMPNT" (see page 16).

CASE 2

To Video Input 1

RX-8010VBK

S-video cable

Source

Equipment

To Video Input 2

(Composite)

RX-8010VBK

Composite
video cable

Source

Equipment

Composite
video cable

Notes:

• When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic

Selection of TV’s Input Mode (see page 48).

• When connecting only the VCR 1 or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.
• Refer also to the manuals supplied with your video components.

CONNECTIONS 2: Video Cable Connection

This receiver is equipped with three types of the video terminals — S-video, composite video, or component video, and the signals coming
into this receiver through one type of video terminals can output only through the same type of the terminal. So you need to connect the VCR
and/or DVD player to the TV using one of the following three ways:

CAUTION:

You can only connect to the TV
with the AV COMPU LINK EX or
AV COMPU LINK III terminal.
DO NOT connect to the TV with
AV COMPU LINK RECEIVER/
AMP terminal.

To Video Input 2

(Component)

RX-8010VBK

Component
video cable

Source

Equipment

Component
video cable

CASE 3

DVD player

VCR 1

EN47_58.RX-8010V[C]_f

01.4.3, 10:19 AM