JVC R-D-S KD-S731R - Manual (Page 23)

23
ENGLISH
To cancel Advanced SCM – SCM LINK
You can cancel the Advanced SCM (Sound Control
Memory), and unlink the sound modes and the
playback sources.
When shipped from the factory, a different sound
mode can be stored in memory for each source so
that you can change the sound modes simply by
changing the sources.
• LINK ON: Advanced SCM (different sound
modes for different sources).
• LINK OFF: Conventional SCM (one sound
mode for all sources).
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press ¢ or 4 to select “SCM LINK.”
3 Turn the control dial to set to the desired indication
(“LINK ON” or “LINK OFF”).
4 Press SEL (select) to finish the setting.
To select the level meter – LEVEL
You can select the level display according to your
preference.
When shipped from the factory, “AUDIO 2” is
selected.
• AUDIO 1: Level meter illuminates from bottom
to top.
• AUDIO 2: Alternates level meter (moves
from bottom to top) and
illumination display.
• OFF: Erases the audio level indicator.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press ¢ or 4 to select “LEVEL.”
3 Turn the control dial to set to the desired indication
(“AUDIO 1”, “AUDIO 2” or “OFF”).
4 Press SEL (select) to finish the setting.
To select the telephone muting – TEL
This mode is used when a cellular phone system is
connected. Depending on the phone system used,
select either “MUTING 1” or “MUTING 2,” whichever
mutes the sounds from this unit.
When shipped from the factory, this mode is
deactivated.
• MUTING 1: Select this if this setting can mute
the sounds.
• MUTING 2: Select this if this setting can mute
the sounds.
• OFF: Cancels the telephone muting.
1 Press and hold SEL (select) for more than 2
seconds so that one of the PSM items appears
on the display.
2 Press ¢ or 4 to select “TEL.”
3 Turn the control dial to set to the desired indication
(“MUTING 1”, “MUTING 2” or “OFF”).
4 Press SEL (select) to finish the setting.
EN21-24.KD-S733_731R[E]f.pm5 11/2/01, 10:27 AM 23