JVC R-D-S KD-S731R - Manual (Page 19)

19
ENGLISH
Using the sound control memory
(SCM)
You can select and store a preset sound
adjustment suitable for each playback source
(Advanced SCM).
Selecting and storing the sound modes
Once you select a sound mode, it is stored in
memory. It will be recalled every time you select
the same source and will be shown on the display.
A sound mode can be stored for each of the
following sources — FM1, FM2, FM3, AM, and CD.
• If you do not want to store the sound mode
separately for each playback source, but want
to use the same sound mode for all the sources,
see “To cancel Advanced SCM – SCM LINK” on
page 23.
Select the sound mode you want.
Each time you press the button, the sound mode
changes as follows:
Indication For: Preset values
BAS TRE LOUD
SCM OFF (Flat sound) 00 00 ON
BEAT Rock or +02 00 ON
disco music
SOFT Quiet +01 –03 OFF
background
music
POP Light music +04 +01 OFF
Recalling the sound modes
When “SCM LINK” is set to “LINK ON”,
select the source.
The sound mode stored in memory for the
selected source is recalled.
Each time you change the
playback source, the SCM
indicator flashes on the display.
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
on page 20.
• To adjust the bass and treble reinforcement levels or
to turn on/off the loudness function temporarily, see
page 18. (Your adjustments will be canceled if
another source is selected.)
• When “SCM LINK” is set to “LINK ON” the
selected sound mode can be stored in memory
for the current source and the effect applies
only to the current source.
• When “SCM LINK” is set to “LINK OFF” the
selected sound mode effect applies to any source.
(BEAT) (SOFT) (POP)
SCM OFF
SCM
Ex.: When you select “BEAT”
EN18-20.KD-S733_731R[E]f.pm5 11/2/01, 10:28 AM 19