9 bezel, Front panel controls featuring advanced ergonomics, Wide selection of control functions – JVC DT-V1710CG User Manual

Page 3: Ul and ce regulatory approval, Rush-current delay, Variable aspect ratio and area & safety markings, Remote control capabilities, Selectable (green/red) color of tally lamp, Hd/sd compatible interface, Aes/ebu digital audio output

Display — Natural Flat-Screen,
Monitor in an Ultra Compact Package

16:9 Bezel

These models come with a 16:9 bezel as a standard accessory, which can be
attached when using the display as an HDTV monitor.

Front Panel Controls featuring Advanced
Ergonomics

The front panel controls are ergonomically designed and rotate smoothly. They
allow fast and simple adjustment of key image parameters such as Brightness,
Phase, Chroma and Contrast.

Extended Multi-Standard Compatibility with
Optional Input Cards (Plug & Play)

Besides the signals of all major digital formats, these monitors will automatically
detect and accept an incoming NTSC or PAL signal. Users can customize the
monitor by inserting optional input cards into the 3 input slots provided. There
are 9 input cards available which together cover virtually every possible input
combination including HD-SDI, SDI, Component/RGB and Video (see chart below).
Each card is automatically recognized when inserted into an input slot.

Wide Selection of Control Functions

Underscan, Aspect Ratio, Color Off, Switchable Area Marker are just some of
the control functions which lend this DTV monitor for use in professional TV
production.

UL and CE Regulatory Approval

Approved under UL (USA) and CE (Europe) regulatory standards.

Rush-Current Delay

Once activated, JVC’s special Rush-Current Delay function reduces the load on
the studio mains power supply when a number of units are powered up
simultaneously. The operator can set delay times for individual monitors in a
range from 0 to 3 seconds.

Variable Aspect Ratio and Area & Safety
Markings

In addition to offering 16:9 and 4:3 image display selectability, there is also a
choice of Area Markings when in 16:9 mode, selectable between 14:9, 13:9, 4:3
or none, with switchable line/black/mat (half) modes for each. The Safety Marker
function displays 80%, 88% or 90% of the area (in either 16:9 or 4:3).

Remote Control Capabilities

Remote control is possible via RS-485 (9-pin D-sub), MAKE (contact closure) or
TRIGGER (15-pin D-sub). With the RS-485 interface, cascaded connection
(0 through 99) and daisy chain connection are possible. Controllability covers
Input Selection A to F, Tally Lamp, Color Off, Area Marker, Aspect Ratio,
Underscan and Status Display. This allows the monitor to be controlled by a
PC via serial communication.

Selectable (Green/Red) Color of Tally Lamp

The color, which is displayed when the tally lamp is on, can be set to either red
or green.

HD/SD Compatible Interface

By installing the optional IF-C61HSDG input card, these monitors will offer
Embedded Audio compatibility for reception of 8 digital audio channels, and
HD/SD input compatibility to link with either type of source material.

AES/EBU Digital Audio Output

The optional IF-C61HSDG input card supports decombined output of embedded
audio (8ch), with 4 sets of 2ch outputs respectively. Also equipped are 2 sets
(L/R) of analog output (RCA) terminals.

Audio Level Indication on Screen

The optional IF-C61HSDG input card also enables display of an on-screen audio
level meter indication. (IF-C51HSDG and IF-C51SDG offer HD level meter and SD
level meter display respectively.)

Power Cord Holder for Preventing Accidental
Disconnection

The provided Power Cord Holder prevents accidental disconnection of the AC
power cord from the AC inlet.

16:9

(When standard accessory

16:9 BEZEL is attached.)

4:3

IN/OUT

IF-C01PNG

IF-C01COMG

IF-C01SDG

IF-C21SDG

IF-C51SDG

IF-C21HSDG

IF-C51HSDG

IF-C61HSDG

IF-C12HSDG

Composite

(VBS)

INPUT

2 sets

(BNCx2)

—

OUTPUT

2 sets

(BNCx2)

—

Video

(Y/C or S)

INPUT

1 set (4pin)

—

OUTPUT

—

Component

(Y, R-Y, B-Y)

INPUT

—

1 set

(BNCx3)

—

OUTPUT

—

1 set

(BNCx3)

—

Analog RGB

(RGB)

INPUT

—

1 set

(BNCx3)

—

OUTPUT

—

1 set

(BNCx3)

—

External

Sync

INPUT

1 set (BNC)

1 set

(BNCx2)

—

OUTPUT

1 set (BNC)

1 set

(BNCx2)

—

Serial Digital

INPUT

(SDI)

—

2 sets

(BNCx2)

2 sets

(BNCx2)

2 sets

(BNCx2)

—

2 sets

(BNCx2)*

—

OUTPUT

—

1 set (BNC)

—

1 set

(BNC)*

—

INPUT

(HD-SDI)

—

1 set (BNC)

2 sets

(BNCx2)*

2 sets

(BNCx2)

OUTPUT

—

1 set (BNC)

1 set

(BNC)*

2 sets

(BNCx2)

Audio

INPUT

Analog

2 sets

(RCAx2)

1 set (RCA)

2 sets

(RCAx2)

—

OUTPUT

2 sets

(RCAx2)

1 set (RCA)

2 sets

(RCAx2)

—

INPUT

Embedded

—

2 sets

(BNCx2)

2 sets

(BNCx2)

2 sets

(BNCx2)

2 sets

(BNCx2)

2 sets

(BNCx2)

2 sets

(BNCx2)

OUTPUT

—

4 sets

(BNCx4)

—

*1 Shared with HD-SDI *2 Shared with SDI