Troubleshooting, Troubleshooting 83 – JVC HR-XVS44UJ User Manual

Page 83

Masterpage:Right

Filename [XVS44UJ_11Trouble.fm]

Page 83

27 August 2003 12:31 pm

TROUBLESHOOTING

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are
often easily corrected, and this can save you the trouble of sending your unit off for repair.

POWER

TAPE TRANSPORT (VCR deck)

PLAYBACK (VCR deck)

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. No power is supplied to the unit.

● The AC power cord is disconnected.

Connect the AC power cord.

2. The Remote won’t function.

● The batteries are discharged.

Replace the dead batteries with new ones.

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. During recording, the tape does not

run. “

⅜

” lights up on the front display

panel.

● The unit is in the Record Pause mode.

Press PLAY (4) to resume recording.

2. The tape will not rewind or fast-

forward.

● The tape is already fully rewound or

fast-forwarded.

Check the cassette.

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. The VCR deck can not be operated.

● The VCR deck is not selected.

On the unit
Press VCR/DVD repeatedly so that the
VCR indicator lights up.
On the Remote
Press VCR so that the VCR indicator lights
up.

2. The playback picture does not appear

while the tape is running.

● If you are using the RF connection,

— the TV receiver’s channel selector is
not set to the VCR channel.
— the unit’s VCR channel has not been
correctly set.

If you are using the RF connection,
— set the TV receiver to the VCR channel.
— perform “Set the VCR channel.”
(

੬

pg. 12).

● If you are using the AV, S-VIDEO or

Component Video connection, the TV
receiver is not set to the AV mode.

If you are using the AV or S-VIDEO
Component Video connection, set the TV
to its AV mode.

3. Noise appears during visual search.

● This is normal.