beautypg.com

Dubbing (from dvd to vcr), Dubbing – JVC HR-XVS44UJ User Manual

Page 68

background image

Filename [XVS44UJ_09Editing.fm]

Masterpage:Left+

68

EN

Page 68

27 August 2003 2:00 pm

EDITING (VCR DECK) (cont.)

Dubbing

(from DVD to VCR)

You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub the copy-protected disc.
In such case, “ERROR” appears on the front display panel.

A

Load a cassette and place a disc.

For the VCR deck
Insert a cassette with the record safety tab intact.
For the DVD deck

A Press OPEN/CLOSE (x) on the DVD deck to open the

disc tray.

B Place the disc in the disc tray.

C Press OPEN/CLOSE (x) on the DVD deck to close the

disc tray.

B

Prepare the VCR deck for dubbing.

A Press VCR.

B Press SP/EP to select recording speed.

C Search for the point where you want to start dubbing

by pressing PLAY (4), FF (5) or REW (3) then
press STOP (8).

C

Prepare the DVD deck for dubbing.

A Press DVD.

B Search for the point where you want to start dubbing

by pressing PLAY (4), FF (5) or REW (3).

C Press PAUSE (9) to pause playback a little before the

start point.

D

Start dubbing.

Press and hold REC (7), then press PLAY (4) on the
Remote.

● “DUB” lights on the front display panel.

E

End dubbing.

Press STOP (8).

● Be sure to press STOP (8) while the VCR indicator lights up on

the unit.

● If you press STOP (8) or EJECT (x) with the DVD deck

selected, the dubbing stopped, but the opening screen is also
recorded.

NOTES:

● You cannot start dubbing when the scan mode is set to the

progressive mode. Set it to the interlace mode. (

pg. 82)

● Set “ON SCREEN GUIDE” to “OFF” (

pg. 81) if you do not

want to record the on-screen display for DVD discs during
dubbing.

● There may be a discrepancy of several seconds between where

you intend editing to start, and where it actually starts.

● The superimposed indication during the operation or dubbing

is not recorded.

● Set “PICTURE CONTROL” to “EDIT”. (

pg. 74)

● Turn on the TV and select the VCR channel (or AV

mode).

● Slide the TV/VCR/DVD switch to the right.

XVS44UJ_01.book Page 68 Wednesday, August 27, 2003 2:01 PM