JVC LCT2172-001C-A - Manual (Page 61)

61
Button Functions
D/A (Digital/Analog)
The D/A button changes the analog and digital channel. Digital channels have a "D" in front of
the channel number.
Press the D/A button
By every press of the D/A button, you can switch between analog and digital
channels.
For example, to move to channel D23:
Press 2 (Two)
Press 3 (Three)
Press the T UNE button
To watch digital channels
Mode
Your remote control can be used to operate some basic functions of your external devices. To
use your device, select the proper mode.
Press the M ODE button
By every press of the Mode button, you can select the mode.
• The indicator on the remote control lights for 3 seconds each time the remote control is
operated.
• The mode light, except for TV lights to indicate which mode is selected.
TV STB VCR DVD AUDIO
Selects the signal input source for the television: VIDEO-1, 2, 3, 4 or 5 for video devices like
VCRs, DVD players or camcorders.
Press the V1, V2, V3, V4 or V5 button
Notes:
• When you return to TV mode, press the R ETURN +/TV button or direct 10 key pad or C HANNEL
+/– button.
• You can also access by pressing the I NPUT button on the front of the TV instead of the
remote control.
• If you have a PC connected to the TV, select VIDEO-5 (V5).
Input
MODE
Device TV
TV STB
STB/DVR
(Cable Satellite)
VCR
VCR/DVR
DVD
DVD Player
(DVD Recorder)
AUDIO
Amplifier/Home
Theater in Box
LCT2172-001C-A English.indd 61 LCT2172-001C-A English.indd 61 3/26/07 8:59:28 AM 3/26/07 8:59:28 AM