JVC RX-60VGD - Manual (Page 45)

42
English
Operating Other Manufacturers’ Video Equipment
This remote control supplied with the receiver can transmit control signals for other
manufacturers’ VCRs and TVs. By changing the transmittable signals from preset ones
to the other manufacturers’, you can operate the other manufacturer’s components using
this remote control.
When operating the other manufacturers’ components, refer also to the instructions
supplied with them. To operate these components with the remote control, first you need
to set the manufacturer’s code each for VCR and TV.
To change the transmittable signals for operating another
manufacturer’s TV
1. Press and hold TV (in the POWER section).
2. Press TV SOUND.
3. Enter manufacturer’s code (two digits) using buttons
1 – 9, and 0.
See the list below to find the code.
4. Release TV in the POWER section.
The following buttons can be used for operating the TV:
TV Turns on and off the TV.
(in the POWER section)
TV VOLUME +/–
Adjusts the volume.
TV/VIDEO Sets the input mode (either TV
or VIDEO).
After pressing TV SOUND, you can perform the
following operations on the TV:
CH +/–
Changes the channels.
1 – 9, 0, +10 Selects the TV channels.
+10 button will function as
the ENTER button if your
TV requires pressing ENTER
after selecting a channel number.
RETURN Alternates between the previously
selected channel and the current channel.
5. Try to operate your TV by pressing TV in the POWER section.
When your TV turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of TV, try each one until
the correct one is entered.
Note:
Refer to the instruction supplied
with your TV.
Manufacturer Code Manufacturer Code
HITACHI 10 SAMSUNG 12
JVC 01 SANYO 13
MAGNAVOX 02 SHARP 06
MITSUBISHI 03 SONY 07
PANASONIC 04, 11 TOSHIBA 08
RCA 05 ZENITH 09
Manufacturers’ codes are
subject to change without
notice. If they are changed,
this remote control cannot
operate the equipment.
SOUND
CONTROL
ONE TOUCH
OPERATION TV/VIDEO
TV
VCD CONTROLVCD-DISC CD-DISC
VCR AUDIO
CENTER REAR (L) CH TV VOLUME
RETURN/ENTER
3 2 1
6 5 4
9 8
0
7/P
+10 10
PHONO
CD
VCR
MUTING
VOLUME
DVD MULTI
TAPE
DVD
POWER
TUNER/ BAND
TV
SOUND
RM-SR60U
REMOTE CONTROL
DAP MODE 3D-PHONIC SURROUND
EFFECT DELAY TEST
SEA MODE SEA PRESET MENU
– REAR•R +
VCD
EN20-46.RX-60VGD[UF]/F 98.8.27, 5:33 PM 42